Installing The Router Into A Rack; Overview Of Installing A Ptx5000 Packet Transport Router Using A Mechanical; Lift - Juniper PTX5000 Hardware Manual

CHAPTER 17

Installing the Router into a Rack

Overview of Installing a PTX5000 Packet Transport Router Using a Mechanical Lift
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.

Overview of Installing a PTX5000 Packet Transport Router Using a Mechanical

Lift on page 173
Tools Required to Install the PTX5000 Packet Transport Router Using a Mechanical
Lift on page 174
Installing the PTX5000 By Using a Mechanical Lift on page 174
Before installing the PTX5000 using a mechanical lift, verify that you have prepared your
site, unpacked the chassis from the shipping crate, and installed the mounting hardware.
Because of the PTX5000 router's size and weight—up to 1,200 lb (544.3 kg) depending
on the configuration— you must install the PTX5000 using a mechanical lift.
To install the PTX5000:
Gather the tools required to install the PTX5000.
1.
See "Tools Required to Install the PTX5000 Packet Transport Router Using a
Mechanical Lift" on page
Read the safety information in
2.
and "PTX5000 Installation Safety Guidelines" on page
Install the PTX5000 into the rack using a mechanical lift.
3.
See "Installing the PTX5000 By Using a Mechanical Lift" on page
Overview of Preparing the Site for the PTX5000 Packet Transport Router on page 109
Overview of Unpacking the PTX5000 Packet Transport Router on page 159
Installing the PTX5000 Mounting Hardware for an Open-Frame Rack on page 169
Installing the PTX5000 Mounting Hardware for a Four-Post Rack or Cabinet on page 165
174.
"General Safety Guidelines and Warnings" on page 581
156.
174.
173