Table 40: Control Board Cb2-Ptx Port Leds - Juniper PTX5000 Hardware Manual

PTX5000 Packet Transport Router Hardware Guide

Table 40: Control Board CB2-PTX Port LEDs

Port Label
HOST/ETHERNET LINK
ACT
(X)GE0 through LINK
(X)GE17
ACT
Related
Documentation
90
Color State
Green On steadily
Yellow On steadily
– Off
– Off
Green Blinking
Green Off
Green On steadily
Green Blinking
PTX5000 Hardware Component Overview on page 5
PTX5000 Control Board Description on page 83
Maintaining the PTX5000 Control Boards on page 485
Troubleshooting the PTX5000 Control Boards on page 524
Troubleshooting the PTX5000 Host Subsystem on page 520
Description
1-Gbps connection.
100-Mbps connection.
10-Mbps connection (If the ACT
green)
Offline
Indicates activity. 1-Gbps connection.
Indicates no activity.
NOTE: These ports are reserved for future use.
(X)GE14 and (X)GE15 are configured as 1-Gigabit
Ethernet ports.
NOTE: These ports are reserved for future use.
and are configured as 1-Gigabit
(X)GE14 (X)GE15
Ethernet ports.
Copyright © 2017, Juniper Networks, Inc.
LED is blinking