Figure 191: Connecting The Metal Retaining Bracket And Ac Power Cord To The Three-Phase Delta Pdu - Juniper PTX5000 Hardware Manual

PTX5000 Packet Transport Router Hardware Guide
316
Push the front installation handle up toward the PDU, and secure the handle with the
5.
captive screws.
Using a number 2 Phillips (+) screwdriver, loosen the four captive screws that secure
6.
the metal retaining bracket to the newly installed PDU. Remove the metal retaining
bracket from the PDU.
Using a number 2 Phillips (+) screwdriver, loosen the two captive screws on the metal
7.
AC wiring compartment of the replacement PDU. Open the metal door of the metal
AC wiring compartment.
Using a number 2 Phillips (+) screwdriver, use the four captive screws on the metal
8.
retaining bracket to secure the AC power cord to the PDU.
Figure 191: Connecting the Metal Retaining Bracket and AC Power Cord
to the Three-Phase Delta PDU
Copyright © 2017, Juniper Networks, Inc.