PTX5000 Packet Transport Router Hardware Guide
Table 37: Control Board CB-PTX LEDs
Label
Color
Blue
MASTER
–
Yellow
FAIL
–
OK
Green
–
Table 38: Control Board CB-PTX Port LEDs
Port
Label
HOST/ETHERNET
Y=10/100
G=1000
ACT
through
(X)GE0
LINK
(X)GE3
ACT
GE4
LINK
ACT
88
Figure 53: Control Board CB-PTX LEDs
1—
MASTER
FAIL
OK
,
, and
2—
Y=10/100 G=1000
and
HOST/ETHERNET
port
State
On steadily
Off
On steadily
Off
On steadily
Off
Color
State
Green
On steadily
Yellow
On steadily
–
Off
Green
On steadily
–
Off
Green
–
Green
–
Green
–
Green
–
1
2
3—
LINK
status LEDs
Ethernet ports labeled
ACT
4—
LINK
LEDs for the
port labeled
Description
Control Board is functioning as the master.
Control Board is functioning as the backup.
Control Board has failed.
No faults have been detected on the Control Board.
Control Board is online and is functioning normally.
Control Board is offline.
Description
1-Gbps connection.
10/100-Mbps connection.
Control Board is offline.
Traffic is passing through the port.
No traffic is passing through the port.
NOTE:
These ports are reserved for future use.
NOTE:
These ports are reserved for future use.
NOTE:
This port is reserved for future use.
NOTE:
This port is reserved for future use.
3
4
ACT
and
LEDs for the 10-Gigabit
(X)GE 0 (X)GE 3
ACT
and
LEDs for the Gigabit Ethernet
GE 4
Copyright © 2017, Juniper Networks, Inc.