Installing The M40E Air Filter; Figure 85: Removing The Air Filter; Figure 86: Installing The Air Filter - Juniper M40E Hardware Manual

Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
All manuals and user guides at all-guides.com

Figure 85: Removing the Air Filter

Installing the M40e Air Filter

To install the air filter (see Figure 86 on page 171):
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect
1.
the strap to one of the ESD points on the chassis. For more information about ESD,
see "Preventing Electrostatic Discharge Damage to an M Series, MX Series, or T Series
Router" on page 232.
Grasp the sides of the air filter and push it firmly into place over the air intake vent.
2.
Tighten the thumbscrew at each corner of the air filter cover.
3.

Figure 86: Installing the Air Filter

M40e Field-Replaceable Units (FRUs) on page 157
Tools and Parts Required to Remove Components from an M40e Router on page 309
Maintaining the M40e Air Filter on page 130
M40e Cooling System Description on page 48
Troubleshooting the Cooling System on the M40e Router on page 150
M40e Clearance Requirements for Airflow and Hardware Maintenance on page 71
Chapter 16: Replacing M40e Hardware Components
171