Installing A Ptx5000 Horizontal Fan Tray; Figure 159: Removing A Lower Horizontal Fan Tray; Figure 160: Installing An Upper Horizontal Fan Tray - Juniper PTX5000 Hardware Manual

PTX5000 Packet Transport Router Hardware Guide

Installing a PTX5000 Horizontal Fan Tray

282

Figure 159: Removing a Lower Horizontal Fan Tray

To install a horizontal fan tray (see
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect
1.
the strap to one of the ESD points on the chassis.
Grasp the fan tray by its handle and insert it straight into the chassis.
2.
Tighten the captive screw on the left side of the fan tray faceplate to secure it in the
3.
chassis, using a number 2 Phillips (+) screwdriver.

Figure 160: Installing an Upper Horizontal Fan Tray

Figure 160 on page 282 and
Copyright © 2017, Juniper Networks, Inc.
Figure 161 on page 283):