Installing A Front T320 Air Filter; Figure 73: Removing The Front Air Filter; Figure 74: Replacing The Front Filter Element - Juniper Core Router T Series Hardware Manual

T320 Core Router Hardware Guide
See Also

Installing a Front T320 Air Filter

194
Grasp the handles and pull the air filter straight out of the chassis.
5.
Remove the filter element from the air filter frame (see
6.

Figure 73: Removing the Front Air Filter

Figure 74: Replacing the Front Filter Element

Preventing Electrostatic Discharge Damage to a T320 Router on page 330
T320 Cooling System Description on page 25
Maintaining the T320 Air Filters on page 274
Troubleshooting the T320 Cooling System on page 297
To install the front air filter (see
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect
1.
the strap to one of the ESD points on the chassis.
Insert the filter element into the air filter frame.
2.
Grasp the air filter by the handles on its faceplate, and slide it straight into the chassis.
3.
Figure 75 on page 195):
Copyright © 2018, Juniper Networks, Inc.
Figure 74 on page 194).