Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
Figure 241: Installing a High Capacity AC PSM
Close the ejector handle so that it is flush with the PSM faceplate.
3.
Verify that the AC input
4.
the PSM is receiving voltage.
Verify that the AC output
5.
output is functioning normally, and the input voltage is within the supported range.
Installing the High Capacity PSM Sleeves on page 380
PTX5000 AC Power System Description on page 42
PTX5000 Power Distribution Unit LEDs on page 56
PTX5000 Power Supply Module LEDs on page 66
Chapter 27: Removing and Installing Power System Components
OK
LED on the PSM faceplate is lit steadily, indicating that
OK
LED on the PSM faceplate is lit steadily, indicating the
371