Figure 116: Connecting Power To The Three-Phase Wye Ac Power Supply - Juniper PTX5000 Hardware Manual

Packet transport router

Hide thumbs Also See for PTX5000:

Table of Contents

Figure 116: Connecting Power to the Three-Phase Wye AC Power Supply

Verify that the AC power wiring connections are correct.

Close the door to the metal AC wiring compartment, and use a number 2 Phillips (+)

screwdriver to tighten the two captive screws to secure the door to the metal AC

wiring compartment.

Verify that the AC power cord does not touch or block access to router components,

and that it does not drape where people could trip on it.

Repeat the procedure for the other three-phase wye AC PDU.

Chapter 21: Connecting the Router to Power

Table of Contents