Connecting Power To The Ptx5000 Three-Phase Wye Ac Pdus; Figure 110: Three-Phase Delta Ac Pdu - Juniper PTX5000 Hardware Manual

Connecting Power to the PTX5000 Three-Phase Wye AC PDUs

Copyright © 2017, Juniper Networks, Inc.

Figure 110: Three-Phase Delta AC PDU

1
2
3
4
5
6
7
8
1— Top installation handle
2— Front installation handle
3— Power OUTPUT switch
4— Air exhaust ventilation
To connect an AC power cord to a three-phase wye AC PDU (see
Switch off the customer-site circuit breakers. Ensure that the voltage across the AC
1.
power source is 0 V and that there is no chance that the voltage might become active
during installation.
Switch the circuit breaker and power
2.
( ) position.
O
Chapter 21: Connecting the Router to Power
5— Circuit breaker
6— Wiring compartment
7— Wiring compartment door
8— Metal retaining bracket
Figure 117 on page
OUTPUT switch on the PDU faceplate to the off
220):
215