Figure 125: Metal Brackets For Power Cords; Power Cords - Juniper PTX5000 Hardware Manual

Copyright © 2017, Juniper Networks, Inc.

Figure 125: Metal Brackets for Power Cords

50mm
1— Metal Bracket with label
740-053918, 740-059634 Power
Cords
—740-053918 indicates the 100-A
power cord and 740-059634 the 150-A
power cord for the High Capacity Delta AC
PDU.
Attach the power cord to the PDU:
6.
Using a number 2 Phillips (+) screwdriver, loosen the two captive screws on the
a.
metal AC wiring compartment.
Open the metal door of the metal AC wiring compartment.
b.
Push the wires of the AC power cord into the area for the metal retaining bracket,
c.
and pull the wires to the left toward the metal AC wiring compartment.
Using a number 2 Phillips (+) screwdriver, use the four screws on the metal retaining
d.
bracket to secure the AC power cord to the PDU (see
Chapter 21: Connecting the Router to Power
Use for 2— Metal Bracket with label
740-053919, 740-059635, 740-035459

Power Cords

power cord for the High Capacity Delta AC
PDU. 740-059635 indicates the 100-A
power cord and 740-035459 the 60-A
power cord.
Use for
—740-053919 indicates the
Figure 126 on page 228).
227