PTX5000 Packet Transport Router Hardware Guide
Installing a PTX5000 60-A or 120-A DC PSM
Related
Documentation
Replacing a PTX5000 High Capacity DC PDU
304
CAUTION:
Each DC PSM weighs approximately 10.6 lb (4.8 kg). Be
prepared to support the full weight of the PSM as you remove it from the
packet transport router.
Place one hand underneath the PSM to support it and slide it completely out of the
5.
chassis.
Figure 181: Removing a PSM
Each DC PSM weighs approximately 10.6 lb (4.8 kg). To install a 60-A or 120-A DC PSM:
Using both hands, slide the PSM into the chassis until you feel resistance .
1.
Actuate the ejector handle to insert the PSM into the chassis.
2.
Tighten the captive screw on the PSM.
3.
Verify that the
4.
INPUT OK
PSM is receiving power.
Verify that the
5.
OUTPUT OK
Understanding Normal-Capacity Power System Power Zones on page 71
PTX5000 Power Distribution Unit LEDs on page 56
Removing a PTX5000 High Capacity DC PDU on page 305
1.
Installing a PTX5000 High Capacity DC PDU on page 307
2.
LED on the PSM faceplate is lit steadily, indicating that the
LED on the PSM faceplate is lit steadily.
Copyright © 2017, Juniper Networks, Inc.