Installing The Ptx5000 Mounting Hardware For An Open-Frame Rack; Installing Cage Nuts, If Needed; Figure 80: Removing The Center-Mounting Bracket - Juniper PTX5000 Hardware Manual

Packet transport router

Hide thumbs Also See for PTX5000:

Table of Contents

Documentation

Installing the PTX5000 Mounting Hardware for an Open-Frame Rack

Center-mounting bracket

Rack Requirements for the PTX5000 Packet Transport Router on page 119

Overview of Installing the PTX5000 Packet Transport Router on page 155

Installing the PTX5000 Mounting Hardware for an Open-Frame Rack on page 169

Overview of Installing a PTX5000 Packet Transport Router Using a Mechanical Lift

Installing Cage Nuts, If Needed on page 169

Installing the Open-Frame Rack Mounting Shelf on page 171

Insert cage nuts, if needed, into the holes listed in

Table 78 on page

170. The hole distances are relative to the standard U division on the

rack that is aligned with the bottom of the mounting shelf and rear support bracket.

Chapter 16: Installing the Mounting Hardware

Table 77 on page 170

Table of Contents