High Capacity Wye Ac Pdu; Figure 42: High Capacity Delta Ac Pdu Leds; Table 23: High Capacity Delta Ac Pdu Leds - Juniper PTX5000 Hardware Manual

PTX5000 Packet Transport Router Hardware Guide

Table 23: High Capacity Delta AC PDU LEDs

LED
PDU OK LED
AC input ( )
~

High Capacity Wye AC PDU

64

Figure 42: High Capacity Delta AC PDU LEDs

1— PDU OK LED
Table 23 on page 64 describes the LEDs on the High Capacity Delta AC PDU faceplate.
Color State
Green On steadily
Blinking
Red On steadily
– Off
Green On steadily
– Off
Figure 43 on page 65 shows the High Capacity Wye AC PDU LEDs.
2— AC input ( ~ ) LED
Description
PDU is functioning normally.
A 36 V converter fault has occurred, but the 36 V output
remains operational.
PDU has failed.
This LED can be off for one of the following reasons:
The PDU is not receiving any input voltage.
The PDU is starting up.
PDU is receiving AC voltage.
Input voltage is not present, or is under –100 VAC.
Copyright © 2017, Juniper Networks, Inc.