Figure 197: Attaching The Metal Retaining Bracket To The Three-Phase Delta Ac; Figure 198: Connecting The Metal Retaining Bracket And Ac Power Cord To The - Juniper PTX5000 Hardware Manual

Copyright © 2017, Juniper Networks, Inc.
Gently push the AC power cord wires through the hole in the metal retaining bracket.
3.
Screw the retaining nut onto the AC power cord to secure the metal retaining bracket
to the replacement AC power cord.
Figure 197: Attaching the Metal Retaining Bracket to the Three-Phase
Delta AC Power Cord
1 1
2
1— Retaining nut
2—Metal retaining bracket
Using a number 2 Phillips (+) screwdriver, loosen the two captive screws on the metal
4.
AC wiring compartment. Open the metal door of the metal AC wiring compartment.
Gently push the wires of the AC power cord into the area for the metal retaining bracket,
5.
and pull the wires to the left toward the metal AC wiring compartment.
Using a number 2 Phillips (+) screwdriver, use the four screws on the metal retaining
6.
bracket to secure the AC power cord to the PDU.
Figure 198: Connecting the Metal Retaining Bracket and AC Power Cord
to the Three-Phase Delta PDU
Chapter 27: Removing and Installing Power System Components
3
3— Three-phase delta AC power cord
323