Upgrading Junos Os On An Offline Ptx5000 - Juniper PTX5000 Hardware Manual

Upgrading Junos OS on an Offline PTX5000

Copyright © 2017, Juniper Networks, Inc.
Before you begin to upgrade:
Perform the tasks described
Transport Router" on page
Ensure that you understand how to prevent ESD damage.
Unpack the upgrade components and verify the parts received.
Gather the tools required for the upgrade and integration.
Antistatic mat or antistatic bag for any components you remove from the chassis
Dust-free resealable plastic bags for temporary storage of port dust covers
ESD grounding wrist strap
Phillips (+) screwdriver, number 2
WARNING: To avoid harm to yourself or the PTX5000 packet transport router
as you install and maintain it, you must follow the safety procedures for
working with Internet routers, as well as the guidelines and warnings for
working with and near electrical equipment. However, providing an exhaustive
set of guidelines for working with electrical equipment is beyond the scope
of this documentation.
See "General Safety Guidelines and Warnings" on page
To upgrade your offline PTX5000 with new FPCs:
Upgrading Junos OS on an Offline PTX5000 on page 469
1.
Powering Off the PTX5000 on page 470
2.
3. Removing and Replacing SIBs in a PTX5000 on page 471
Powering On the PTX5000 on page 473
4.
Verifying the Replaced SIBs on page 475
5.
Upgrading the FPCs on page 475
6.
Upgrade Junos OS on the PTX5000 to the appropriate Junos OS Release for the FPC
being upgraded to (see "FPCs Supported on the PTX5000" on page
Installation and Upgrade Guide
in"Preparing to Upgrade the FPCs in a PTX5000 Packet
455.
.
Chapter 33: Upgrading FPCs
581.
97). See the
469