Siemens scalance WLC711 Reference Manual page 352

The following example downloads a CSR file using FTP and applies it to the topology named test:
WLC.siemens.com
test test.csr
The following example sets the certificate to the factory default for the topology named test:
WLC.siemens.com
WLC.siemens.com
Factory default certificate/key
The following example specifies use of IPv6:
WLC.siemens.com
certs ipv6-cert.pem ipv6-key.pem abc123 ipv6
copy-csr
Use this command to upload a topology certificate signing request to a server. The
command is available in the topology:<named-topology>:l3 context.
copy-csr scp|ftp server user password dir [ipv6]
Parameters
scp | ftp
server
user
password
dir
ipv6
Example
WLC.siemens.com
tmp ipv6
dhcp
Use the command to enter the topology:<named-topology>:l3:dhcp context of the CLI for b@ac,
dhcp
physical, and routed topologies.
The following commands are available in the topology:<named-topology>:l3: dhcp context.
•
dhcp-servers on page 353
•
dls on page 353
•
dls-address on page 354
•
dns on page 354
•
domain on page 355
•
exclude on page 355
SCALANCE WLC711 CLI Reference Guide
:topology:test:l3# cert csr-cert ftp 1.1.1.1 test abc123 /
:topology:test:l3# cert default
:topology:test:l3# show cert
:topology:test:l3# # cert pem-der ftp 1.1.1.1 test abc123 /
Specifies the type of server, FTP or SCP, to which the file will be uploaded.
IP address of the FTP or SCP server.
User name to login to the server.
User password.
Directory on server to put the certificate signing request file.
Specifies that the certificate is IPv6.
:topology:test:l3# copy-csr ftp 192.168.1.1 root mypasswd /
topology Commands
copy-csr
copy-csr
352