Siemens scalance WLC711 Reference Manual page 252

Examples
The following example deletes the RADIUS server named test-radius-server:
WLC.siemens.com
include-service-type
Use the
include-service-type
client Access-Request message. The
vnsmode:radius context of the CLI.
include-service-type enable|disable
Parameters
enable
disable
Examples
WLC.siemens.com
polling-interval
Use this command to configure the RADIUS test request timeout. This command is available from the
vnsmode:radius:<named_RADIUS_server> context.
polling-interval (30 - 300)
Parameters
none
Examples
This example sets the RADIUS server polling-interval to 43:
WLC.siemens.com
polling-mechanism
Use this command to configure the RADIUS server polling mechanism. This command is available from
the vnsmode:radius:<RADIUS_server> context.
polling-mechanism (actual-user | rfc5997)
SCALANCE WLC711 CLI Reference Guide
:vnsmode:radius# delete test-radius-server
command to include or exclude the Serice-Type attribute in the
include-service-type
Include the Service-Type attribute in the client Access-Request message.
Exclude the Service-Type attribute from the client Access-Request message.
:vnsmode:radius# include-service-type enable
:vnsmode:radius:<named_RADIUS_server># polling-interval 43
VNS Commands (vnsmode)
include-service-type
command is accessible from the
252