Chapter 25: Rf Location Commands; Location-Engine - Siemens scalance WLC711 Reference Manual

25
RF Location Commands

location-engine

default-height
auto-tracking
default-env-mode
floor-plan
on-demand
publish
show
This section describes commands used to enable and configure the Radio Frequency (RF) Location
engine on a Wireless Appliance to determine location and perform tracking on wireless mobile users
through Wireless APs. These commands are located in the location context of the CLI. Execute the
command at the root level to enter location context.
location
Refer to the section entitled "Using the RF Location Engine" in the Wireless User Guide for more
information about RF Location configuration.
All CLI commands cache changes. For this reason, sometimes when you make a change in a particular
context, the change may not be visible immediately. If this happens, you must exit and re-enter the
context in order to ensure that the database is synchronized with the latest change.
The following commands are available in the location context:
•
location-engine
•
default-height
•
auto-tracking
•
default-env-mode
•
floor-plan on page 411
•
on-demand on page 413
•
export on page 412
•
import on page 412
•
copy on page 28
•
delete on page 413
•
publish on page 413
•
show on page 414
location-engine
Use the
location-engine
The
location-engine
SCALANCE WLC711 CLI Reference Guide
on page 409
on page 410
on page 410
on page 411
command to enable or disable the RF Location engine on this controller.
command is accessible from the location context of the CLI.
409