Siemens scalance WLC711 Reference Manual page 29
Hide thumbs
Also See for scalance WLC711:
- Getting started (100 pages) ,
- Compact operating instructions (30 pages) ,
- Maintenance manual (73 pages)
Table of Contents
Advertisement
Parameters
server
user
dir
file
platform
cdr_dir/file
#file
scp
scp password
ftp password
to-local
to-flash
to-remote
from-local
from-flash
from-remote
flash
floor-plan show
Examples
The following example copies the certificate request (.csr) file for a Wireless AP:
WLC.siemens.com
The following command copies the Call Detail Records from the Wireless Appliance onto the specified
server location:
WLC.siemens.com
20110824173358.dat
Please input password:
Attempting to upload file using ftp
SUCCESS: Upload completed.
The following command copies an upgrade image for the C25 platform from a server to the Wireless
Appliance:
WLC.siemens.com
C25
Please input password:
SCALANCE WLC711 CLI Reference Guide
Specifies the IP address of the FTP or SCP server. The IP address can be either IPv4
A.B.C.D or IPv6 A:B:C:D:E:F:G:H format.
Specifies the user name of an account on the FTP or SCP server.
Specifies the name of a directory on the FTP or SCP server.
Specifies the name of a file on the Wireless Appliance.
Specifies the platform of the Wireless AP.
Specifies the location of a file on the Wireless Appliance.
The sequence in which the files are listed in the corresponding list. For more
information, see
list
on page 229.
Sets the file transfer protocol to SCP rather than the default setting of FTP.
The scp password to use with scp for the ssh connection.
The ftp password to use with ftp.
Specifies the local drive as the location the configuration is copied to
Specifies the flash drive as the location the configuration is copied to
Specifies the configuration is copied to the specified device or server
Specifies the configuration to be copied is located on the local drive
Specifies the configuration to be copied is located on the flash drive
Specifies the configuration to be copied is located on the specified remote device
or server
This option is available only when a flash device is plugged in
Displays a list of all locally-stored floor plans
# copy ap_certreq 192.168.1.131 jdoe /jdoe/OrlandoAP.csr
.com# copy cdrs 192.168.3.108 test mycdr 20110824wed/
# copy apup 192.168.16.21 test new/ap/ C25-0x.xx.xx.000x.img
root Commands
copy
29
Advertisement
Table of Contents
