Traceroute - Siemens scalance WLC711 Reference Manual

number
nostats
Examples
The following example creates a tech-support file for Wireless AP, Wireless Appliance, and log
information, which is assigned a default file name. A comment to identify the file is also added:
WLC.siemens.com
Filename (tech_support.06122005.135027):
Comment: Technical support information for MrUser12
Please wait...
Creating tech_support.06122005.135027...
Executing AP commands...
............................
Executing AC commands...
..............................................................................
.............
Executing LOG commands...
Tech_support backup complete.
The following example deletes a tech-support file by name:
WLC.siemens.com
Successfully deleted file tech_ap.tar.gz

traceroute

Use the
traceroute
specify the source interface.
traceroute source-interface | name | number id | IP Address
Parameters
source-interface
name
number id
IP Address
SCALANCE WLC711 CLI Reference Guide
Specifies the how listed number the file appears.
This parameter can be used with [tech_support ap] and [tech_support all]. If the
[nostats] option is specified, the technical support file will not have any traffic
statistic information.
# tech_support all
# no tech_support tech_ap.tar.gz
command to perform a traceroute to a specified IP address. Optionally, you can
Keyword indicating that a source interface will be specified.
Identifies the source interface by name. The names are platform specific. You can
use the show topology command to display a list of interfaces.
Identifies the source interface by number. The numbers are platform specific.
Specifies an IP address. The IP address can be either IPv4 A.B.C.D or IPv6
A:B:C:D:E:F:G:H format.
root Commands
traceroute
76