Siemens scalance WLC711 Reference Manual page 100

logs
Use the command to modify Wireless AP logs. The
logs
context of the CLI.
When the system prompts you to input password, you must enter the FTP server's password.
logs aplist | apply | collection | destination | end | exit | frequency | logout
| show
Parameters
aplist
apply
collection
destination
end
exit
frequency
logout
show
Examples
The following example enables AP log collection:
WLC.siemens.com
maintenance
The
maintenance
command is accessible from the ap context of the CLI.
upgrd
Use the command to upgrade the Wireless AP's software image. The
upgrd
accessible from the ap:maintenance context of the CLI.
After you run the
upgrd
command.
upgrd default | control
SCALANCE WLC711 CLI Reference Guide
Configures the AP list to collect logs.
Applies AP log settings.
Enables or disables AP log collection.
Sets the AP log destination.
Returns to the base mode.
Returns to the previous mode.
Configures AP log collection frequency per day.
Logs out.
Displays settings.
:ap# logs collection enable
command allows for upgrading a Wireless AP's software image. The
command to upgrade the Wireless AP's software image, run the
command is accessible from the ap
logs
upgrd
ap Commands
logs
maintenance
command is
apply
100