Chapter 2: Introduction To The Cli; Cli Wizard - Siemens scalance WLC711 Reference Manual
Hide thumbs
Also See for scalance WLC711:
- Getting started (100 pages) ,
- Compact operating instructions (30 pages) ,
- Maintenance manual (73 pages)
Table of Contents
Advertisement
2
Introduction to the CLI
CLI Wizard
CLI Structure
Account Types
The commands of the CLI are structured in a hierarchical set of contexts. Each context contains
commands which relate to a specific type of function. For example, the radio1 context is a set of
commands available for configuring operational parameters on the Radio1 radio of an access point. To
configure default Radio1 parameters for AP3710s, you must move down from the root context through
the ap, default, ap37xx, radio1 contexts (ap:defaults:ap37xx:radio1) to reach, set, and apply those
parameters. To configure Radio1 parameters for a specific access point for which you know the ID
(serial number), move down from the root context through the ap, <serial>, and radio1 contexts (ap:
0409920200000000:radio1).
CLI Wizard
The CLI wizard is designed to configure administrative settings on the controller. The CLI wizard begins
automatically when a user with administrative access logs into the controller for the first time or when
the system has been reset to the factory default. Instructions display when the wizard starts. Each
screen in the wizard presents the default response in square brackets [ ]. You can exit the wizard by
pressing [CTRL] + [C].
To complete the CLI wizard:
1
Press Enter to begin configuring the controller in the CLI wizard.
The Change Admin Password screen appears.
2 Enter y to change the administrator password, otherwise enter n and press Enter.
The Current Host Attribute Settings screen appears.
3 Enter y to change the host attributes, otherwise enter n and press Enter.
You can change the following host attributes:
•
Host Name - Management port's (Admin) hostname.
•
Domain Name - Management port's (Admin) domain name.
•
IP Address - Management port's (Admin) IP address.
•
Netmask - Management port's (Admin) subnet mask.
•
Gateway - Management port's (Admin) gateway.
•
Primary DNS - Address of the Primary DNS.
•
Secondary DNS - Address of the Secondary DNS.
The Current Time Settings screen appears.
SCALANCE WLC711 CLI Reference Guide
11
Advertisement
Table of Contents
