Siemens scalance WLC711 Reference Manual page 257

The following commands are available in the vnsmode:radius:<named_ RADIUS_server> context:
•
acct-port on page 257
•
acct-prio on page 257
•
acct-retries on page 258
•
acct-timeout on page 258
•
auth-port on page 258
•
auth-prio on page 259
•
auth-retries on page 259
•
auth-timeout on page 259
•
fast-failover on page 260
•
interim on page 260
•
ip on page 261
•
name on page 261
•
protocol on page 261
•
shared-secret on page 262
acct-port
Use the
acct-port
accessible from the vnsmode:radius:<named_RADIUS _server> context of the CLI.
If you do not change the port with this command, the default port 1813 is used.
acct-port 0-65535
Parameters
0-65535
Example
The following example sets the RADIUS accounting port to 1646 for the RADIUS server named RAD1:
WLC.siemens.com
acct-prio
Use the
acct-prio
accessible from the vnsmode:radius:<named_RADIUS _server> context of the CLI.
acct-prio integer
Parameters
integer
SCALANCE WLC711 CLI Reference Guide
command to set the port for RADIUS accounting. The
Specifies the RADIUS accounting port
:vnsmode:radius:RAD1# acct-port 1646
command to set the priority for RADIUS accounting. The
Specifies the RADIUS accounting priority. Possible values can be any integer 0 or
greater.
VNS Commands (vnsmode)
acct-port
command is
acct-port
command is
acct-prio
257