Siemens scalance WLC711 Reference Manual page 192
Hide thumbs
Also See for scalance WLC711:
- Getting started (100 pages) ,
- Compact operating instructions (30 pages) ,
- Maintenance manual (73 pages)
Table of Contents
Advertisement
Example
The following example enables countermeasures on two concurrent channels:
WLC.siemens.com
WLC.siemens.com
dosa
Use the
command to enable or disable removal of network access from clients originating DoS
dosa
attacks. The
command is accessible from the mitigator:scprof:<named scan profile> context and
dosa
the mitigator:gsprof:<named guardian scan profile> context of the CLI.
After you run the
dosa
dosa (enable | disable)
Parameters
enable
disable
Example
The following example enables DoS attack client removal:
WLC.siemens.com
WLC.siemens.com
drop-faf
Use the
drop-faf
flood attack. The
drop-faf
context and the mitigator:gsprof:<named guardian scan profile> context of the CLI.
After you run the
drop-faf
drop-faf (enable | disable)
Parameters
enable
disable
Example
The following example enables frame dropping:
WLC.siemens.com
WLC.siemens.com
SCALANCE WLC711 CLI Reference Guide
:mitigator:gsprof:scp_name# concurrent-number 2
:mitigator:gsprof:scp_name# apply
command, run the
apply
Enables removal of clients originating DoS attacks from network access
Disables removal of clients originating DoS attacks from network access
:mitigator:scprof:scp_name# dosa enable
:mitigator:scprof:scp_name# apply
command to enable or disable dropping frames in a controlled manner during a
command is accessible from the mitigator:scprof:<named scan profile>
command, run the
Enables dropping of frames during a flood attack
Disables dropping of frames, even during a flood attack
:mitigator:scprof:scp_name# drop-faf enable
:mitigator:scprof:scp_name# apply
command to implement the change.
command to implement the change.
apply
Radar Commands
dosa
192
Advertisement
Table of Contents
