Siemens scalance WLC711 Reference Manual page 94

•
assign-wlan on page 95
•
bandpreference
•
name on page 95
•
radio-load on page 96
•
radio1-loadcontrol
•
radio2-loadcontrol
•
radio1-strictlimit
•
radio2-strictlimit
•
show on page 99
assign-ap
Use this comment to add or remove the AP radios from the named radio type load group. The
command is accessible from the ap:load-groups:<named-load-group> context of the CLI, for load
ap
groups of type radio.
assign-ap add | delete | ap-name
Parameters
add | delete
ap-name
Usage
If the specified AP is already assigned to a load group, a new assignment removes the original radio
assignment. You are prompted to confirm the new assignment.
Examples
Example code is not currently available.
assign-radio
Use the assign-
radio
this command to unassign the AP radios from the named client load group. The assign
command is accessible from the ap:load-groups:<named-load-group> context of the CLI, for groups of
type client.
assign-radio add | delete ap-name radio1 | radio2 | both
Parameters
add | delete
ap-name
radio1 | radio2 | both
If you assign radios that are currently assigned to another load group, the radios will automatically be
removed from the other load group.
SCALANCE WLC711 CLI Reference Guide
on page 95
on page 97
on page 97
on page 98
on page 98
Add or remove the specified AP radio from the load group.
Specifies the AP.
command to assign AP radios to the named client load group. You can also use
Use add to assign a Wireless AP's radios to a load group. Use delete to
unassign radios from a load group.
The name of the Wireless AP.
The radios that you want to assign or unassign.
ap Commands
assign-ap
assign-
-radio
94