Siemens scalance WLC711 Reference Manual page 300

mac-acct
Use the
mac-acct
beginning of RADIUS accounting after MAC-based authorization completes.
After you run the
mac-acct
mac-acct (enable | disable)
Parameters
Enables the recording of MAC account records on RADIUS after authorization.
enable
Disables the recording of MAC account records on RADIUS after authorization.
disable
Usage
This command is available only when MAC-based authorization is enabled (see
the wlan:<WLAN-service-name>:auth context).
Example
This example disables RADIUS recording of MAC records after authentication:
WLC.siemens.com
WLC.siemens.com
mac-auto-authenticate
Use the
mac-auto-authenticate
auto-authenticate
the CLI.
After you run the
mac-auto-authenticate
changes.
mac-auto-authenticate enable | disable
Parameters
enable | disable
Usage
The
mac-auto-authenticate
is enabled, using the
on page 302. For
mac
SCALANCE WLC711 CLI Reference Guide
command in the wlans:<WLAN-service-name>:auth context to enable or disable the
command, run the
:wlans:cnl-AAA:auth# mac-acct disable
:wlans:cnl-AAA:auth# apply
command to automatically authenticate authorized users. The
command is accessible from the wlans:<WLAN-service-name>:auth context of
Specify to enable or disable automatic authentication of authorized users
command is available in all authentication modes, if MAC authentication
command. For authentication
mac enable
command information, see
command to implement the changes.
apply
command, run the
apply
command information, see
mode
mac on page 299.
wlans Commands
mac-acct
page 299 command in
command to implement the
mac-
mode
300