Default-Env-Mode; Floor-Plan - Siemens scalance WLC711 Reference Manual

Parameters
enable | disable
Example
The following example enables auto-tracking:
WLC.siemens.com

default-env-mode

Use the
default-env-mode
this location are operating. The
of the CLI.
default-env-mode (0 | 1 | 2 | 3 | 4)
Parameters
0 | 1 | 2 | 3 | 4
Examples
The following example sets the default environmental mode to indoor open space:
WLC.siemens.com

floor-plan

Use the
floor-plan
command is accessible from the location context of the CLI.
The following commands are available in the location:floor-plan context:
•
copy on page 28
•
delete on page 413
•
end on page 16
•
exit on page 17
•
export on page 412
•
help on page 17
•
import on page 412
SCALANCE WLC711 CLI Reference Guide
Enables or disables auto-tracking by the location engine on this controller.
:location# auto-tracking enable
command to set the default mode for the environment in which the APs at
default-env-mode
Specifies the default environmental mode for this location. Valid values are:
•
0: Indoor open space (halls, auditoriums)
•
1: Office Environment with light divisions (cubicles)
•
2: Office Environment with dry walls divisions
•
3: Office Environment with hard divisions (brick)
•
4: Interior Walls (need be defined in the floor plan)
:location# default-env-mode 0
command to enter the location:floor-plan context. The
RF Location Commands
command is accessible from the location context
area-tracking
default-env-mode
411