Siemens scalance WLC711 Reference Manual page 338

Example
The following example sets the post-authentication timeout value to 10 minutes for this WLAN service:
WLC.siemens.com
WLC.siemens.com
timeout-pre
Use the
timeout-pre
WLAN service. The
context of the CLI.
After you run the
timeout-pre
timeout-pre 0-999999
Parameters
0-999999
Example
The following example sets the pre-authentication timeout value to 10 minutes for this WLAN service:
WLC.siemens.com
WLC.siemens.com
WLC.siemens.com
pre-authentication timeout(minutes): 10
timeout-session
Use the
timeout-session
service. The
timeout-session
of the CLI.
After you run the
timeout-session
timeout-session 0-999999
Parameters
0-999999
Example
The following example sets the session timeout value to never for this WLAN service:
WLC.siemens.com
WLC.siemens.com
SCALANCE WLC711 CLI Reference Guide
:wlans:test# timeout-post 10
:wlans:test# apply
command to set the pre-authentication timeout value (in minutes) for this
command is accessible from the wlan:<WLAN-service-name>
timeout-pre
command, run the
Specify the pre-authentication timeout value in minutes for this WLAN service.
:wlans:test# timeout-pre 10
:wlans:test# apply
:wlans:test# show timeout-pre
command to set the session timeout value (in minutes) for this WLAN
command is accessible from the wlan:<WLAN-service-name> context
command, run the
Specify the session timeout value in minutes for this WLAN service.
:wlans:test# timeout-session 0
:wlans:test# apply
command to implement the changes.
apply
command to implement the changes.
apply
wlans Commands
timeout-pre
338