Start; Stop - Siemens scalance WLC711 Reference Manual
Hide thumbs
Also See for scalance WLC711:
- Getting started (100 pages) ,
- Compact operating instructions (30 pages) ,
- Maintenance manual (73 pages)
Table of Contents
Advertisement
1:mgmt_traffic_dump.cap
2:mgmt_traffic_dump.cap (flash)
3:mgmt_traffic_dump-01.cap (flash)
4:mgmt_traffic_dump-02.cap (flash)
5:dhcp-relay-01.cap (flash)
6:third-party-01.cap (flash)
7:mgmt_traffic_dump-03.cap (flash)
start
Use the
command to start capturing the exception traffic to and from the management plane.
start
The capture includes the following:
•
All traffic on the management port (eth0)
•
Exception traffic for the physical esa ports and defined VNS
The
command is accessible from the traffic_capture context of the CLI.
start
start
Parameters
None
Example
The following example specifies to start capturing the exception traffic:
WLC.siemens.com
stop
Use the
command to stop capturing the exception traffic to and from the management plane. The
stop
command is accessible from the traffic_capture context of the CLI.
stop
stop
Parameters
None
Example
The following example specifies to stop capturing the exception traffic:
WLC.siemens.com
SCALANCE WLC711 CLI Reference Guide
:traffic_capture# start
:traffic_capture# stop
traffic_capture Commands
start
230
Advertisement
Table of Contents
