Siemens scalance WLC711 Reference Manual page 347

enable
disable
Example
This example enables multicast filtering support:
WLC.siemens.com
move
Use the command to change the order of multicast rules. The
move
the topology:<named-topology>:l2:multicast context of the CLI for b@ac, b@ap, and routed topologies.
move pos pos
Parameters
pos
pos
Example
This example moves multicast rule 2 to the bottom of the list (after position 4):
WLC.siemens.com
show
Use the command to show multicast support for the specified topology. The
show
available from the topology:<named-topology>:l2: multicast context of the CLI for b@ac, b@ap, and
routed topologies.
show
Parameters
None
Example
This example shows the multicast support for a topology named r1:
WLC.siemens.com
Multicast support: disable
port
Use the command to assign a port to a topology. The
port
topology:<named-topology>:l2 context of the CLI for b@ac and physical topologies.
SCALANCE WLC711 CLI Reference Guide
Indicates that multicast filtering support is enabled.
Indicates that multicast filtering support is disabled.
:topology:test:l2:multicast# filter enable
The current position of the multicast rule. Possible values are 0–255.
The new position of the multicast rule. Use a number one greater than the
last rule to move a rule to the bottom of the list. Possible values are 0–255.
:topology:test:l2:multicast# move 2 5
:topology:r1:l2:multicast# show
topology Commands
command is available from
move
show
command is available from the
port
move
command is
347