Siemens scalance WLC711 Reference Manual page 315
Hide thumbs
Also See for scalance WLC711:
- Getting started (100 pages) ,
- Compact operating instructions (30 pages) ,
- Maintenance manual (73 pages)
Table of Contents
Advertisement
direct-client-traffic
Use the
direct-client-traffic
communication. The
service-name> context of the CLI.
After you run the
direct-client-traffic
changes.
direct-client-traffic enable | disable
Parameters
enable
disable
Example
The following example specifies to block direct client to client communication:
WLC.siemens.com
WLC.siemens.com
WLC.siemens.com
Block MU to MU traffic: enable
egress-filtering
Use the
egress-filtering
egress-filtering
After you run the
egress-filtering
egress-filtering enable | disable
Parameters
enable
disable
Example
The following example enables filtering on the test WLAN:
WLC.siemens.com
WLC.siemens.com
WLC.siemens.com
Egress Filtering: enable
SCALANCE WLC711 CLI Reference Guide
command to enable or disable the blocking of direct client to client
direct-client-traffic
command, run the
Specify to block direct client to client communication
Specify to allow direct client to client communication
:wlans:test# direct-client-traffic enable
:wlans:test# apply
:wlans:test# show direct-client-traffic
command to enable or disable egress filtering on this WLAN service. The
command is accessible from the wlans:<WLAN-service-name> context of the CLI.
command, run the
Enables filtering on this WLAN service.
Disables filtering on this WLAN service.
:wlans:test# egress-filtering enable
:wlans:test# apply
:wlans:test# show
command is accessible from the wlans:<WLAN-
command to implement the
apply
command to implement the changes.
apply
wlans Commands
direct-client-traffic
315
Advertisement
Table of Contents
