Host-Attributes - Siemens scalance WLC711 Reference Manual

The following example copies the local export file with index 2 to a flash drive:
WLC.siemens.com
The following example lists all locally-stored floor plans:
WLC.siemens.com
Locally stored floor-plan files:
1. 1.fxml
2. 10.fxml
3. 101.fxml
4. 12.fxml
5. 12_export.fxml

host-attributes

Move to the host-attributes context from the root context to configure host attributes on the Wireless
Appliance.
The following commands are available in the host-attributes context:
•
hostname on page 31
•
domain on page 31
•
dns on page 32
hostname
Use the
hostname
After you have run the
hostname name | none
Parameters
name
none
Examples
The following example specifies that the host name of the controller should be 123.
WLC.siemens.com
WLC.siemens.com
domain
Use the command to configure the domain name for the controller.
domain
After you have run the
SCALANCE WLC711 CLI Reference Guide
# copy configuration to-flash from-local 2
# copy floor-plan show
command to configure a hostname for the controller.
command, run the
hostname
Specifies the hostname of the controller.
Removes the configured hostname.
:host-attributes# hostname 123
:host-attributes# apply
command, run the
domain
command to implement the changes.
apply
command to implement the changes.
apply
root Commands
host-attributes
31