Siemens scalance WLC711 Reference Manual page 319

Example
The following example changes the privacy mode of the WLAN service named "test" to WPA-PSK:
WLC.siemens.com
WLC.siemens.com
WLC.siemens.com
Privacy mode: wpa-psk
wep
Use the command to configure WEP privacy settings. The
wep
wlan:<WLAN-service-name>:priv context of the CLI.
After you run the
wep
wep key-length 64|128|152 ((key value) | (pass-phrase strings)) [key-idx (1|2|3|
4)]
Parameters
key-length 64|128|152
key value
pass-phrase strings
key-idx (1|2|3|4)
Usage
The wep command is available when the privacy
see mode on page 318.
Example
The following example sets the WEP key to 64 bits in length with a pass phrase string of "Sl==p":
WLC.siemens.com
WLC.siemens.com
WLC.siemens.com
Static Keys(WEP):
WEP key length: 64
Input method: input string
WEP string: Sl==p
wpa-broadcast-rekey
Use the
wpa-broadcast-rekey
broadcast-rekey
CLI.
After you run the
wpa-broadcast-rekey
change.
wpa-broadcast-rekey none | 30-86400
SCALANCE WLC711 CLI Reference Guide
:wlans:test:priv# mode wpa-psk
:wlans:test:priv# apply
:wlans:test:priv# show mode
command, run the
apply
Specifies the length of the WEP key (64, 128, or 152 bits)
Specifies the WEP key as a hex value
Specifies the WEP key as a plain text string
Specifies the WEP key index
:wlans:test:priv# wep key-length 64 pass-phrase Sl==p
:wlans:test:priv# apply
:wlans:test:priv# show wep
command to configure the re-key interval for group keys. The
command is accessible from the wlan:<WLAN-service-name>:priv context of the
command, run the
command is accessible from the
wep
command to implement the name change.
mode on page 318 is set to wep. For more information,
command to implement the name
apply
wlans Commands
wep
wpa-
319