no flash
Use the
no flash
root context.
no flash file name
Example
The following example deletes the files from the flash device:
WLC.siemens.com
Successfully deleted file lab-91-f.16082010.110525 from flash
healthpoll
Use the
healthpoll
healthpoll enable | disable
Parameters
enable
disable
Example
The following command enables the poll timer:
WLC.siemens.com
WLC.siemens.com
healthpoll enable
import
Use the
command to import the controller's configuration from a file that was earlier exported
import
from a previous platform or an old software release. If you want to import the controller's data from a
remote FTP or SCP server, you must use the
see
copy
on page 28. Use the
drive.
[no] import filename | number
SCALANCE WLC711 CLI Reference Guide
command to delete files on a flash device. The
# no flash lab-91-f.16082010.110525
command to enable or disable the poll timer.
Enables the poll timer.
Disables the poll timer.
# healthpoll enable
# show healthpoll
command to remove the specified file from the local or flash
no import
no flash
command. For more information,
copy configuration
root Commands
no flash
command is under the
36