Siemens scalance WLC711 Reference Manual page 148
Hide thumbs
Also See for scalance WLC711:
- Getting started (100 pages) ,
- Compact operating instructions (30 pages) ,
- Maintenance manual (73 pages)
Table of Contents
Advertisement
Examples
This example lists the valid antenna models that can be entered with this command, then executes the
command with an appropriate model number:
WLC.siemens.com
<antenna_model>
antenna_model:
<list of valid antenna models>
WS-ANT02 AG 4dBi Omni Factory
No Antenna
WLC.siemens.com
Factory
This example removes a configured middle antenna:
WLC.siemens.com
antennaright
Use the
antennaright
accessible from the <serial> context of the CLI if the AP supports configuration of a right antenna. To
display a list of the available antenna models, enter the command without arguments. The
command is accessible from the ap:<serial> context of the CLI.
antennaright
The antenna commands available are dependent on the AP type.
antennaright antenna_model
Parameters
antenna_model
Examples
This example lists the valid antenna models that can be entered with this command, then executes the
command with an appropriate model number:
WLC.siemens.com
<antenna_model>
antenna_model:
<list of valid antenna models>
WS-ANT01 AG 4dBi Omni Factory
No Antenna
WLC.siemens.com
Factory
This example removes a configured right antenna:
WLC.siemens.com
SCALANCE WLC711 CLI Reference Guide
:ap:0500010032150135# antennamiddle Usage: antennamiddle
:ap:0500010032150135# antennamiddle WS-ANT02 AG 4dBi Omni
:ap:0500010032150135# antennamiddle No Antenna
command to select an antenna supported by the Wireless AP. This command is
Model name of an antenna supported by the Wireless AP.
:ap:0500010032150135# antennaright Usage: antennaright
:ap:0500010032150135# antennaright WS-ANT01 AG 4dBi Omni
:ap:0500010032150135# antennaright No Antenna
ap Commands
antennaright
148
Advertisement
Table of Contents
