Siemens scalance WLC711 Reference Manual page 267

Parameters
enable
disable
Examples
This example enables automatic synchronization of the current VNS, named VNS1, across paired
controllers:
WLC.siemens.com
WLC.siemens.com
wlans-name
Use the
wlans-name
Service with the current VNS. Only one WLAN Service can be associated with a VNS at a time.
After you run the
wlans-name
wlans-name WLAN-Service-name
Parameters
WLAN-Service-name
Example
This example changes the associated WLAN Service to wlan4 for the VNS named VNS1:
WLC.siemens.com
WLC.siemens.com
show
Use the command in the vnsmode:<named-VNS> context to display information about the
show
current VNS.
show
Parameters
None.
SCALANCE WLC711 CLI Reference Guide
Enables automatic synchronization of this VNS across paired
controllers.
Disables automatic synchronization of this VNS.
:vnsmode:VNS1# sync enable
:vnsmode:VNS1# apply
command in the vnsmode:<named-VNS> context to associate a different WLAN
command, run the
Specifies the name of the .WLAN Service to associate with this VNS.
:vnsmode:VNS1# wlans-name wlan4
:vnsmode:VNS1# apply
VNS Commands (vnsmode)
command to implement the changes.
apply
wlans-name
267