flex-client-access
Use the
flex-client-access
medium. The
flex-client-access
name>:qos-policy context of the CLI.
After you run the
flex-client-access
changes.
flex-client-access enable | disable
Parameters
enable | disable
Example
The following example enables flexible client access to the wireless medium:
WLC.siemens.com
WLC.siemens.com
WLC.siemens.com
Flex client access: enable
legacy
Use the
command to enable or disable the legacy solution, which gives all packets on the VNS
legacy
high priority. The
legacy
context of the CLI.
After you run the
legacy
legacy enable | disable
Parameters
enable | disable
Note
Legacy Wireless QoS support cannot be re-enabled once it has been disabled.
Example
The following example enables the legacy solution for the VNS:
WLC.siemens.com
WLC.siemens.com
WLC.siemens.com
Legacy: enable
SCALANCE WLC711 CLI Reference Guide
command to enable or disable flexible client access to the wireless
command is accessible from the wlan:<WLAN-service-
command, run the
Enables or disables flexible client access to the wireless medium.
:wlans:test:qos-policy# flex-client-access enable
:wlans:test:qos-policy# apply
:wlans:test:qos-policy# show flex-client-access
command is accessible from the wlan:<WLAN-service-name>:qos-policy
command, run the
apply
Enables or disables the legacy solution.
:wlans:CNL-7-CP:qos-policy# legacy enable
:wlans:CNL-7-CP:qos-policy# apply
:wlans:CNL-7-CP:qos-policy# show legacy
command to implement the
apply
command to implement the changes.
wlans Commands
flex-client-access
325