Siemens scalance WLC711 Reference Manual page 334

Example
The following example enables 802.11k support on the WLAN service:
WLC.siemens.com
energy-save-mode
Use the
energy-save-mode
command is accessible from the wlan:<WLAN-service-name>:rf context of the CLI.
save-mode
energy-save-mode enable | disable
Parameters
enable | disable
Example
The following example enables AP energy saving mode:
WLC.siemens.com
process-client-ie
Use the
process-client-ie
(IE 10). The
process-client-ie
context of the CLI.
After you run the
process-client-ie
process-client-ie enable | disable
Parameters
enable | disable
Example
The following example enables IE 10 processing:
WLC.siemens.com
WLC.siemens.com
show
Use the command to display the current RF settings of the specified individual WLAN service. The
show
command is accessible from the wlan:<WLAN-service-name>:rf context of the CLI.
show
SCALANCE WLC711 CLI Reference Guide
:wlans:AZ-723-WLAN1:rf# 11h-support enable
command to enable or disable the AP energy saving mode. The
Enables or disables the AP energy saving mode on the WLAN service.
:wlans:CNL-7-CP:rf# energy-save-mode enable
command to enable or disable the processing of Information Element 10
command is accessible from the wlan:<WLAN-service-name>:rf
command, run the
Enables or disables the processing of Information Element 10 (IE 10) on the Wireless
Appliance.
:wlans:CNL-7-CP:rf# process-client-ie enable
:wlans:CNL-7-CP:rf# apply
energy-save-mode
command to implement the changes.
apply
wlans Commands
energy-
334