Upgrade_Backup_Dest; Upgrade_Image_Src - Siemens scalance WLC711 Reference Manual
Hide thumbs
Also See for scalance WLC711:
- Getting started (100 pages) ,
- Compact operating instructions (30 pages) ,
- Maintenance manual (73 pages)
Table of Contents
Advertisement
upgrade apup platform | filename | number ap ap_serial# ap_serial# ... ap_serial#
Parameters
platform
filename
number
ap_serial#
Example
The following example upgrades a Wireless AP:
WLC.siemens.com
Notice
Upgrading an AP will disconnect any clients currently using the AP. Following the upgrade, the AP is
rebooted.
upgrade_backup_dest
Use the
upgrade_backup_dest
remote ftp server.
upgrade_backup_dest server | user | password | dir | file
Parameters
server
user
password
dir
file
Example
The following example backs up the controller's existing software image on the remote ftp server:
WLC.siemens.com
backup backupFile-rescue-user.tgz
upgrade_image_src
Use the
upgrade_image_src
upgrade_image_src server | user | password | dir | file
SCALANCE WLC711 CLI Reference Guide
Specifies the platform of the Wireless AP.
Specifies the file name of the new image.
Specifies an ordinal image number returned by the show apup command.
Specifies the serial number of the Wireless AP.
# upgrade apup C25
command to backup the controller's existing software image on the
The FTP server where the backup image will be created.
The user name to access the FTP server.
The password to access the FTP server.
The directory where the new software image is located.
The file name that you want to assign to the backup image.
# upgrade_backup_dest 192.168.4.181 administrator abc123 /
command to locate the new software image on the remote server.
root Commands
upgrade_backup_dest
79
Advertisement
Table of Contents
