Siemens scalance WLC711 Reference Manual page 350
Hide thumbs
Also See for scalance WLC711:
- Getting started (100 pages) ,
- Compact operating instructions (30 pages) ,
- Maintenance manual (73 pages)
Table of Contents
Advertisement
ap-register
Use the
ap-register
The
ap-register
for b@ac and physical topologies.
ap-register enable | disable
Parameters
enable
disable
Example
The following example enables AP registration:
WLC.siemens.com
cert
Use the
command to define certificate settings for the named topology in the current context.
cert
Using the
command with the default option removes the certificate from the named topology and
cert
assigns the factory default certificate to it.
cert ((pkcs12 scp|ftp server user password dir filename certpassword [chainfile]
[ipv6]) | (pem-der scp|ftp server user password dir filename keyfile certpassword
[chainfile] [ipv6])| (csr-cert scp|ftp server user password dir filename
[chainfile] [ipv6])) | permanent | permanent-chain [ipv6] | default [ipv6]
Parameters
pkcs12
pem-der
csr-cert
scp|ftp
server
user
password
dir
filename
keyfile
certpassword
SCALANCE WLC711 CLI Reference Guide
command to enable or disable AP registration through the named topology.
command is available from the topology:<named-topology>:l3 context of the CLI
Enables AP registration through this interface.
Disables AP registration through this interface.
:topology:esa0:l3# ap-register enable
Indicates that <filename> certificate file is in the PKCS #12 format.
Indicates that the <filename> certificate file and <keyfile> key file are PEM/DER
encoded.
Indicates that the <filename> is a certificate signing request file.
Indicates that either SCP or FTP should be used to download the certificate file.
IP address of the server from which the file should be downloaded
Userid of the account to login with on the SCP or FTP server
Password associated with the <user> userid
Directory in which to find the PKCS #12 certificate file, CSR file, or PEM/DER encoded
certificate file and key file.
The name of the PKCS #12, PEM/DER, or CSR certificate file to use with the port. This
must be a PKCS #12 file if the permanent option is not used.
The PEM/DER encoded private key file
Password to use with the private key file
topology Commands
ap-register
350
Advertisement
Table of Contents
