Siemens scalance WLC711 Reference Manual page 363
Hide thumbs
Also See for scalance WLC711:
- Getting started (100 pages) ,
- Compact operating instructions (30 pages) ,
- Maintenance manual (73 pages)
Table of Contents
Advertisement
move
Use the
command to change the order (position) of an exception filter. The
move
available from the topology:<named-topology>:l3: exceptions context of the CLI for b@ac, physical,
and routed topologies.
move pos pos
Parameters
pos
pos
Example
The following example moves exception filter at position 4 to 25:
WLC.siemens.com
show
Use the
command to display a list of exception filters. The
show
topology:<named-topology>:l3:exceptions context of the CLI for b@ac, physical, and routed
topologies.
In the
command output, the (I) indicates that the exception filter is an internal (read-only) filter
show
that has been pre-defined.
show
Parameters
None
Examples
The following example displays the exception filters for the r1 topology.
WLC.siemens.com
Exception filter(I): 1027 proto tcp 11.11.11.17 255.255.255.255 port 60606
both deny
Exception filter(I): 1028 proto tcp 0.0.0.0 255.255.255.255 port 50200 both
deny
Exception filter(I): 1029 proto tcp 11.11.11.17 255.255.255.255 port 32768
65535 both allow
Exception filter(I): 1030 proto udp 11.11.11.17 255.255.255.255 port 32768
65535 both allow
Exception filter(I): 1031 proto udp 11.11.11.17 255.255.255.255 port 67 both
allow
Exception filter(I): 1032 proto udp 255.255.255.255 255.255.255.255 port 67
both allow
Exception filter(I): 1033 proto icmp 11.11.11.17 255.255.255.255 port 0 255
both allow
Exception filter(I): 1034 proto none 0.0.0.0
SCALANCE WLC711 CLI Reference Guide
Specifies the current position of the exception filter (0–255).
Specifies the new position of the exception filter (0–255).
:topology:r1:l3:exceptions# move 4 25
:topology:r1:l3:exceptions# show
topology Commands
move
command is available from the
show
both deny
move
command is
363
Advertisement
Table of Contents
