Siemens scalance WLC711 Reference Manual page 153
Hide thumbs
Also See for scalance WLC711:
- Getting started (100 pages) ,
- Compact operating instructions (30 pages) ,
- Maintenance manual (73 pages)
Table of Contents
Advertisement
Example
WLC.siemens.com
name
Use the
command to assign or change the name of the Wireless AP. The
name
accessible from the ap:<serial> context of the CLI.
name newname
Parameters
newname
Example
The following example sets the name of the Wireless AP:
WLC.siemens.com
port-setting
Use the
port-setting
command is accessible from the ap:<serial> context of the CLI.
port-setting
port-setting auto | (( half | full ) ( 10 | 100 ))
Parameters
auto
half | full
10 | 100
Example
The following example sets the Ethernet port on the AP to auto:
WLC.siemens.com
professional_antenna
The
professional_antenna
contains commands to configure professional antenna attributes. The
command is accessible from the ap:<serial> context of the CLI.
SCALANCE WLC711 CLI Reference Guide
:ap:0500008043050212# move aclist 3 + 2
Specifies the new name of the Wireless AP
:ap:0500008043050212# name HomeAP1
command to set the duplex mode and speed of the AP's Ethernet port. The
Auto negotiate speed and duplex mode
Half or full duplex mode
10Mbps or 100Mbps Ethernet
:ap:0500008043050212# port-setting auto
command moves you into the professional-antenna context, which
ap Commands
command is
name
professional_antenna
name
153
Advertisement
Table of Contents
