Siemens scalance WLC711 Reference Manual page 337
Hide thumbs
Also See for scalance WLC711:
- Getting started (100 pages) ,
- Compact operating instructions (30 pages) ,
- Maintenance manual (73 pages)
Table of Contents
Advertisement
Example
The following example enables this WLAN service:
WLC.siemens.com
WLC.siemens.com
WLC.siemens.com
Enable status: enable
sync
Use the
command to enable or disable automatic synchronization of this WLAN service across
sync
paired Wireless Appliances. The
context of the CLI.
After you run the
sync
sync enable | disable
Parameters
enable | disable
Example
The following example enables synchronization for this WLAN service:
WLC.siemens.com
WLC.siemens.com
WLC.siemens.com
Synchronize: enable
timeout-post
Use the
timeout-post
WLAN service. The
context of the CLI.
After you run the
timeout-post
timeout-post 0-999999
Parameters
0-999999
SCALANCE WLC711 CLI Reference Guide
:wlans:test# status enable
:wlans:test# apply
:wlans:test# show status
command is accessible from the wlan:<WLAN-service-name>
sync
command, run the
apply
Enables or disables automatic synchronization of this WLAN service across paired
Wireless Appliances.
:wlans:test# sync enable
:wlans:test# apply
:wlans:test# show sync
command to set the post-authentication timeout value (in minutes) for this
command is accessible from the wlan:<WLAN-service-name>
timeout-post
command, run the
Specify the post-authentication timeout value in minutes for this WLAN service.
command to implement the changes.
command to implement the changes.
apply
wlans Commands
sync
337
Advertisement
Table of Contents
