Siemens scalance WLC711 Reference Manual page 98

For access to this command, the load group must be defined as a radio type load group.
Example
The following example disables load control on Radio2:
WLC.siemens.com
radio1-strictlimit
Use the
radio1-strictlimit
Radio1 when Radio Load Control is active. When strict limit is enabled, any clients in excess of the
configured limits on the radio are immediately disconnected. The
accessible from the ap:load-groups:<named-loadgroup> context.
radio1-strictlimit enable | disable
Parameters
enable | disable
Usage
Radio Load Control must be enabled for this radio before this command can take effect.
Example
The following example enables strict load limiting on Radio1:
WLC.siemens.com
radio2-strictlimit
Use the
radio2-strictlimit
Radio2 when Radio Load Control is active. When strictlimit is enabled, any clients in excess of the
configured limits on the radio are immediately disconnected. The
accessible from the ap:load-groups:<named-loadgroup> context.
radio2-strictlimit enable | disable
Parameters
enable | disable
Usage
Radio Load Control must be enabled for this radio before this command can take effect.
SCALANCE WLC711 CLI Reference Guide
:ap:load-groups:radiogroup1# radio2-loadcontrol disable
command to enable or disable strict enforcement of hard load limits on
Enables or disables the strict enforcement of load limits on Radio1.
:ap:load-groups:radiogroup1# radio1-strictlimit enable
command to enable or disable strict enforcement of load limits on
Enables or disables the strict enforcement of load limits on Radio2.
ap Commands
radio1-strictlimit
command is
radio1-strictlimit
command is
radio2-strictlimit
98