Ap Context - Siemens scalance WLC711 Reference Manual
Hide thumbs
Also See for scalance WLC711:
- Getting started (100 pages) ,
- Compact operating instructions (30 pages) ,
- Maintenance manual (73 pages)
Table of Contents
Advertisement
ap Context
The following commands are at the highest (first) level of the ap context:
•
access
on page 82
•
blacklist
on page 83 — See for commands in the ap:blacklist context.
•
defaults
on page 86 — See for commands in the ap:defaults context.
•
export_drm
on page 91
•
import_drm
on page 91
•
load-groups
on page 92 — See for commands in the ap:load-groups context.
•
logs
•
logout
on page 19
•
maintenance
on page 100 — See for commands in the ap:maintenance context.
•
registration
on page 101 — See for commands in the ap:registration context.
•
remove
on page 104
•
search
on page 104
•
serial
on page 105
•
<serial>
on page 106 — See
context.
access
Use the
command to modify the registration status of Wireless APs on the system. The
access
command is accessible from the ap context of the CLI.
access ap_serial release | pending | approved | reboot | foreign | sensor [force]
If rehoming is enabled, the command to change a local AP to a Foreign AP is:
access ap_serial foreign
The command to change a foreign AP to a Local AP is:
access ap_serial approved
Parameters
ap_serial
release | pending | approved | reboot |
foreign |
Usage
Rehoming is enabled if availability is enabled between two V9.01 and higher controllers. Both
Controllers need to be in the same regulatory domain. Sensors and APs in WDS/MESH configurations
cannot be rehomed. APs in load groups will be removed from the load group if they are rehomed.
SCALANCE WLC711 CLI Reference Guide
Serial Commands
on page 144 for commands in the ap:<serial>
The serial number of the Wireless AP.
The administrative options for the Wireless AP.
ap Commands
ap Context
access
82
Advertisement
Table of Contents
