Siemens scalance WLC711 Reference Manual page 195
Hide thumbs
Also See for scalance WLC711:
- Getting started (100 pages) ,
- Compact operating instructions (30 pages) ,
- Maintenance manual (73 pages)
Table of Contents
Advertisement
Parameters
port-number
Example
The following example specifies port 1538 as the port used for rogue detection on the AP for the
scp_name scan profile in-service:
WLC.siemens.com
WLC.siemens.com
rogue
Use the
command to enable or disable rogue detection for this scan profile. The
rogue
command is accessible from the mitigator:scprof:<named scan profile> context of the CLI.
The
command is only available if security scan is enabled (see
rogue
rogue enable | disable
Parameters
enable
disable
Example
The following example enables rogue detection for the scp_name scan profile in-service:
WLC.siemens.com
WLC.siemens.com
rogue-prevent
Use the
rogue-prevent
rogue AP. The
rogue-prevent
context of the CLI.
rogue-prevent enable | disable
Parameters
enable
disable
SCALANCE WLC711 CLI Reference Guide
Specifies the number of the port used for rogue detection on the AP. Valid port
numbers are 1-32768.
:mitigator:scprof:in-service# port 1538
:mitigator:scprof:in-service#
Enables rogue detection for this scan profile.
Disables rogue detection for this scan profile.
:mitigator:scprof:in-service# rogue enable
:mitigator:scprof:in-service#
command to enable or disable the prevention of any station from using a
command is accessible from the mitigator:scprof:<named scan profile>
Enables the prevention of any station from using a rogue AP.
Disables the prevention of any station from using a rogue AP.
Radar Commands
rogue
security-scan
on page 196).
rogue
195
Advertisement
Table of Contents
