Delete; List - Siemens scalance WLC711 Reference Manual

Example
The following example specifies the exception traffic to be captured on esa0:
WLC.siemens.com

delete

Use the command to delete the TCPDump file. The
delete
traffic_capture context of the CLI.
To display the "TCPDump file capture" list, run the
the CLI. For more information, see
delete # from the capture file list
Parameters
# from the capture file

list

Example
The following example specifies the file # 1 in the "TCPDump file capture" list to be deleted:
WLC.siemens.com
list
Use the command to display the "TCPDump file capture" list. The
list
from the traffic_capture context of the CLI.
The files that are stored on the CF card have flash suffixed to their file names. For example,
mgmt_traffic_dump.cap (flash). The files that are stored on the local drive of the controller do not have
anything suffixed to them.
You can save only one TCPDump file on the local drive.
list
Parameters
None
Example
The following example displays the list of TCPDump file capture:
WLC.siemens.com
Traffic Capture Files:
SCALANCE WLC711 CLI Reference Guide
:traffic_capture# interface esa0
list on page 229.
The sequence in which the files are listed in the capture file list
:traffic_capture# delete 1
:traffic_capture# list
traffic_capture Commands
command is accessible from the
delete
command from the traffic_capture context of
list
list
delete
command is accessible
229