Siemens scalance WLC711 Reference Manual page 329

Example
The following example enables U-APSD on the CNL-7-CP WLANS:
WLC.siemens.com
WLC.siemens.com
WLC.siemens.com
Enable U-APSD: enable
uplink
Use the command to manage the uplink policer action for this WLANS. The
uplink
is accessible from the wlan:<WLAN-service-name>:qos-policy context of the CLI.
After you run the
uplink
uplink delts | do-nothing
Parameters
delts
do-nothing
Usage
This command is only active if the Video and Voice Admission Control is set to enable. See
admission-control
Example
The following example defines the uplink policer action to end TSPEC violations by deleting the TSPEC
for the CNL-7-CP WLANS:
WLC.siemens.com
WLC.siemens.com
wmm
Use the command to enable Wi-Fi Multimedia enhancements for audio, video, and voice
wmm
applications. The
wmm
of the CLI.
After you run the
wmm
wmm enable | disable
Parameters
enable | disable
SCALANCE WLC711 CLI Reference Guide
:wlans:CNL-7-CP:qos-policy# uapsd enable
:wlans:CNL-7-CP:qos-policy# apply
:wlans:CNL-7-CP:qos-policy# show uspsd
command, run the
Specifies that TSPEC violations will end when they are discovered. This action
deletes the TSPEC.
Specifies that TSPEC violations are allowed to continue when they are discovered.
Data transmissions will continue and no action is taken against the violating
transmissions.
on page 330 and voice-admission-control
:wlans:CNL-7-CP:qos-policy# uplink delts
:wlans:CNL-7-CP:qos-policy# apply
command is accessible from the wlan:<WLAN-service-name>:qos-policy context
command, run the
apply
Enables or disables Wi-Fi Multimedia enhancements on the WLANS.
command to implement the changes.
apply
on page 330.
command to implement the changes.
wlans Commands
uplink
command
uplink
video-
329