Siemens scalance WLC711 Reference Manual page 401

Usage
The CLI <named-site> context must be in config mode for a RADIUS server to execute the
command. Use the
config mode.
Example
The following example configures a VNS name as a NAS ID for site1:
WLC.siemens.com
nasip
Use the command to configure an NAS IP address for this site. The
nasip
accessible from the site:<named-site> context. Use config exit to exit config mode.
nasip A.B.C.D | vnsip
Parameters
A.B.C.D
vnsip
Usage
The CLI <named-site> context must be in config mode for a RADIUS server to execute the
command. Use the
Example
The following example configures a VNS IP address as the IP address for site1:
WLC.siemens.com
password
Use the
password
is accessible from the site:<named-site> context.
password string
Parameters
string
Usage
The CLI <named-site> context must be in config mode for a RADIUS server to execute the
command. Use the
config mode.
SCALANCE WLC711 CLI Reference Guide
command to enter config mode. Use
config radius name
:site:site1# nasid vnsname
Specifies an IP address for this <named-site>.
Specifies that the VNS IP address is used as the IP address for this <named-site>.
command to enter config mode.
config radius name
:site:site1# nasip vnsip
command to set the authentication password for this site. The
Specifies an authentication password for this <named-site>.
command to enter config mode. Use
config radius name
site Commands
nasip
nasid
to exit
config exit
command is
nasip
nasip
command
password
password
to exit
config exit
401